Party, Party, Party!

 Coop's party was a big event that was held at a great venue - a rented hall connected to the shopping mall. Several trips were made to get all the props for his jungle themed party. Jen and Brie put a lot of effort into planning this and it really turned out great.

Lots of people, lots of balloons, lots of food, lots of fun.



Comments

Post a Comment

Popular posts from this blog

Image
  Camera: Nikon FM2N Film: Ilford Delta 100 Date Developed: 3/28/2024 Location: Mill Creek, WA, 47.867225, -122.186051 Conditions: Light rain, taken mid-day. Comments: If you look closely, you can see some symmetry that is the result of a double exposure. The images are offset just enough to add some depth to the compilation.
Read more
Image
  Camera: Nikon FM2N Film: HP5 Plus 400 Date taken: 4/5/2024 0815hrs. Notes: Snow from front porch in Meadow Vista, CA, 39.0085938, -121.0261329, 50mm Nikkor, f1.4, 1/2000.
Read more
Image
 120 Format Pinhole Camera project I started this project on Father's Day and since today was a holiday I had a chance to make bit more progress on it. One small part has slowed me down a bit more than I anticipated, it's a small T-shaped part that fits into the film spindle. The spindle has a T-slot in the end that this fits into. The part is threaded in the center and has a brass cross piece. I intend to put this part into the spindle, put the spindle in camera, then a shaft will thread into this part so I can advance the film by turning a knob on the top of the camera. Here's picture of the top of the spindle, you can see the slot. The small part I have made fits into the slot like this: The top of the camera will have a hole for a shaft that will screw into the small fitting. I will make knob that attaches to the shaft on the top of the camera so I can turn the knob to wind film onto the spindle thereby advancing the film. I'm sure it is hard to envision all of this...
Read more